CAS:108-10-1

 

Characteristics: Colorless liquid. Stable. Slightly soluble in water, miscible with most organic solvents. Its vapors will form explosive mixtures with air. Strong local irritant and toxic.

 

Uses: Solvent, separating agent for inorganic salts, ore dressing agent, adhesive, rubber glue, developing solvent for PMMA in electron beam lithography technology

CAS:110-15-6

 

Characteristics: Succinic acid is a colorless crystal, sublimated by distillation under reduced pressure, soluble in water, slightly soluble in ethanol, ether and acetone, flammable and corrosive.

 

Uses: Food, medicine, electronic chelating agent, textile additive, lubricant

CAS:110-063-4

 

Characteristics: Colorless liquid with high boiling point, low toxic odor. Completely soluble in water, most alcohols, esters, ketones, glycol ethers and acetates, but may be not or partially miscible in common aliphatic and aromatic chlorinated hydrocarbons.

 

Uses: Widely used in the manufacture of THF, PBT, PU, ​​GBL, NMP, coatings, PBS biodegradable plastics

CAS:25608-33-7

 

Characteristics: Acrylic resin power is made from the polymerization of acrylic monomers by heating, which can be used directly after dissolving with solvent, saving the equipment and time required for the synthesis reaction.

 

Uses: Intaglio ink, coating, ASA and PVC synthesis, anti-shrinkage agent

CAS:79-41-4

 

Characteristics: MAA is a colorless transparent liquid at room temperature. Easily soluble in hot water, ethanol and most organic solvents. Polymerizable. Its vapor can form explosive mixtures with air. Moderately toxic, strong irritant to skin and mucous membranes.

​

Uses: Industrial raw material and intermediate for organic synthesis, methyl methacrylate is widely used in the production of organic glass, coatings, adhesives,

CAS:111-76-2

 

Characteristics: Colorless liquid with moderate ether odor. Flammable, low toxicity. Soluble in water by 20 times volume, soluble in most organic solvents such as ethanol, ether, mineral oils, etc. High dilution ratio with petroleum hydrocarbons.

 

Uses: Solvent for spray paints, varnishes, quick-drying paints, cellulose nitrate, enamels and paint strippers, dispersing agent for pesticides, raw material for organic synthesis, wetting agent for fibers, plasticizer for resins, analytical reagent for iron and molybdenum, etc.

CAS:97-88-1

 

Characteristics: NBMA a colorless liquid with a sweet and ester odor at room temperature, insoluble in water, miscible in most organic solvents such as alcohols and ethers.

​

Uses: Monomer of acrylate solvent-based and emulsion-based adhesives, acrylate polymers and copolymers, emulsifier, finishing agent, additive and adhesive for industrial products

CAS:97-86-9

 

Characteristics: IBMA a colorless liquid with a sweet and ester odor at room temperature, insoluble in water, miscible in most organic solvents such as alcohols and ethers.

​

Uses: Monomer of acrylate solvent-based and emulsion-based adhesives, acrylate polymers and copolymers, emulsifier, finishing agent, additive and adhesive for industrial products

CAS:101-43-9

 

Characteristics: White transparent liquid. Insoluble in water, soluble in ethanol, ether, chloroform, etc.

​

Uses: Modifier of resins for coatings, raw material of resins for optical materials such as prisms and lenses, Modifier of resins for colorants and adhesives, raw material of dental filling resins

CAS:80-05-7

Characteristics: BPA is common known as bisphenol A in mainland China. A chemical that is a known endocrine disrupting chemical (environmental hormone). An organic compound with two phenolic functional groups. BPA is used in the synthesis of polycarbonate plastics and epoxy resins.

​

​Uses: Key monomer for the production of epoxy resins, the most commonly raw material for polycarbonate plastics, the precursor for the the synthesis of flame retardant tetrabromobisphenol A (TBBPA), color developer for copying or reacting to the heat source used in sterilization or production of carbonless copy paper and thermal paper

CAS:100-21-0

 

Characteristics: PTA is one of the benzenedicarbonic acid isomers, which has two carboxyl groups located in the para position of the benzene ring and the chemical formula of p-C6H4(COOH)2. PTA is a raw material for the production of polyester, especially polyethylene terephthalate (PET).

​

Uses: Raw material for polyester fibers, PET bottles, polyester engineering plastics, polyester films, polybutylene terephthalate (fibers), PBT engineering plastics, polyester coating resins, plasticizers for DOTP

CAS:77-99-6

 

Characteristics: White flaky crystals. Easily soluble in water, lower alcohols, glycerin, and dimethylformamide, partially soluble in ethyl acetate, acetone, slightly soluble in ether, chloroform, and carbon tetrachloride, insoluble in aliphatic hydrocarbons, aromatic hydrocarbons, and chlorinated hydrocarbons. High hygroscopic.

​

Uses: Polyester, polyurethane foam, production of alkyd coatings, plasticizers, synthetic lubricants, surfactants, explosives, heat stabilizer and textile aid for rosin ester polyethylene resins

CAS:97-65-4

 

Characteristics: Itaconic acid is a white crystal with a special odor, soluble in water, ethanol, acetone, slightly soluble in chloroform, benzene and ether. Not volatile, sublimated under vacuum, decomposed by overheating. Polymerizable.

 

Uses: Chemical reagent, monomer of synthetic fibers and synthetic resins, adhesive

CAS:2855-13-2

 

Characteristics: It is a colorless to pale yellow liquid with an amine-like odor. It has relatively low solubility in water but is soluble in alcohols, ethers, and other organic solvents. It can react with a variety of chemicals, particularly undergoing condensation reactions with carboxylic acids and isocyanates to form polyurethanes and other polymer materials.

 

Uses: It is primarily used in the manufacture of polyurethane resins, epoxy resin hardeners, coatings, and adhesives.

CAS:4098-71-9

 

Characteristics: It is a colorless to pale yellow liquid with an irritating odor. It is almost insoluble in water but soluble in organic solvents, such as alcohols, ethers, and aromatic solvents. It can react with a variety of compounds, particularly undergoing polymerization reactions with polyols to produce polyurethanes.

 

Uses: It is primarily used in the manufacture of polyurethane resins, coatings, adhesives, and foam materials.

CAS:120-61-6

 

Characteristics: It is typically a colorless or pale yellow crystalline solid, with good solubility in organic solvents such as alcohols and esters, but low solubility in water. DMT can be prepared through the esterification reaction of terephthalic acid with methanol.

 

Uses: It is primarily used in the synthesis of polyesters, such as polyethylene terephthalate (PET), which is widely applied in plastic bottles, fibers, and films. It is also used as a plasticizer in certain polymers to improve flexibility and impact resistance.

CAS:29385-43-1

 

Characteristics:Tolyltriazole is relatively stable in air, resistant to oxidation, and possesses good thermal stability. One of its most notable characteristics is its ability to effectively prevent metal corrosion, particularly for copper and its alloys.alic acid with methanol.

 

Uses:Tolyltriazole is primarily used to prevent the corrosion of metals, especially copper, copper alloys, and iron. In industrial settings, it is commonly applied in water treatment systems, cooling towers, and piping systems, where it effectively inhibits rust formation. It is also used as an anti-corrosion additive in the production and maintenance of automobiles, ships, and other vehicles. Additionally, it serves as a corrosion and oxidation inhibitor in certain chemical products and lubricants, helping to extend shelf life and enhance product stability.

CAS:868-77-9

 

Characteristics:2-HEMA is a colorless, transparent liquid monomer with good hydrophilicity and polymerizability. It contains both a hydroxyl group and a reactive methacrylate double bond, allowing it to undergo free-radical polymerization and form strong, transparent polymers. It can copolymerize with various other monomers and exhibits good chemical stability and biocompatibility, making it suitable for materials in contact with the human body.

​

Uses: 2-HEMA is widely used in the production of soft contact lenses, especially hydrogel-based lenses, due to its water-retentive and biocompatible properties. It is also used in dental resins, medical device coatings, smart hydrogels, and high-performance adhesives and coatings. Its strong adhesion and flexibility make it valuable in both biomedical and industrial polymer applications.tance.

CAS:818-61-1

 

Characteristics:2-HEA is a highly reactive acrylate monomer with the chemical formula C5H8O3. It appears as a colorless, transparent liquid with a slightly irritating odor. Its molecular structure features a hydroxyl group for hydrophilicity and an acrylate double bond for polymerization, offering excellent adhesion, flexibility, and copolymerization potential. It is compatible with both water-based and solvent-based systems

 

Uses: 2-HEA is used in UV-curable coatings, adhesives, inks, electronic materials, and biomedical polymers. It can be copolymerized with acrylates, methacrylates, and other monomers to tailor flexibility and adhesion. In coatings, it improves adhesion to substrates like metal, glass, and plastic. In biomedical fields, it is often used for hydrogels and biocompatible polymer surfaces.

CAS:103-11-7

 

Characteristics: 2-EHA is a low-volatility, colorless liquid monomer with a characteristic ester odor. It has the chemical formula C11H20O2 and contains an acrylate group for polymerization along with a long, branched 2-ethylhexyl side chain. This structure results in low glass transition temperature (Tg), excellent flexibility, softness, and weather resistance in the resulting polymers.lic acid with methanol.

 

Uses: 2-EHA is commonly used in pressure-sensitive adhesives, acrylic emulsions, sealants, elastomeric coatings, and modified plastics. It is typically copolymerized with monomers like MMA, BA, or AA to adjust softness and tack. Its low Tg enhances the elasticity and low-temperature performance of products, making it ideal for flexible coatings in construction and automotive industries.

CAS:552-30-7

 

Characteristics: Trimellitic Anhydride is a white crystalline solid with the chemical formula C9H4O5. It is an aromatic anhydride derived from trimellitic acid. TMA is slightly soluble in water and reacts readily with alcohols and amines to form esters and amides. It has good thermal stability and is primarily used as a reactive intermediate due to its two anhydride groups and one carboxylic group.

 

Uses:TMA is mainly used in the production of plasticizers, resins, and polyester-imide coatings. It is an important raw material for polyimide resins and alkyd resins, especially those requiring high heat resistance and electrical insulation properties. In the PVC industry, it is used to produce trimellitate plasticizers, which offer high temperature stability and low volatility, making them suitable for wire & cable insulation, automotive interiors, and flexible films.

CAS:77-85-0

 

Characteristics: Trimethylol Ethane is a colorless crystalline solid with the chemical formula C5H12O3. It contains three hydroxyl (-OH) functional groups, making it highly reactive and capable of reacting with various compounds such as acids, isocyanates, and anhydrides. TME exhibits good chemical and thermal stability and is commonly used to enhance the crosslinking density and mechanical properties of polymer materials.ol.

 

Uses: TME is widely used in the production of polyester resins, polyurethanes, acrylic emulsions, and other high-performance resin materials. Due to its trifunctional structure, it effectively improves heat resistance, hardness, and chemical resistance of materials. It is commonly found in automotive coatings, industrial coatings, powder coatings, and adhesives to enhance coating performance and durability.