top of page
白色塑料顆粒

PLASTIC & RUBBER

DPM (Dipropylene Glycol Methyl Ether)

CAS:34590-94-8

 

Characteristics: Colorless transparent liquid with a faint ether odor. Low toxicity, low viscosity, low surface tension, moderate evaporation rate, good solubility and good coupling ability. It can dissolve oil, rubber and natural resins such as ethyl cellulose, cellulose nitrate, polyvinyl acetate, polyvinyl butyral, alkyd resin, phenolic resin, urea resin, etc.

 

Uses: Solvents for ink , paints, textile dyes, textile oils, cleaning agent in LCD production, coupling agent for cosmetics, stabilizer for skincare agents, agricultural pesticides and floor brighteners

DOM (DIOCTYL MALEATE)

CAS:142-16-5

 

Characteristics: DOM is a clear, almost colorless liquid with an ester-like odor. It has a double bond structure and can be added and amidated with compounds such as olefins, hydrogen, thiols, amines, and ammonia. High flash point, highly resistant to self-aggregation.

 

Uses: Surfactant, plasticizer, adhesive, chemical intermediate, wetting agent

NOM (N-Octyl Mercaptan)

CAS:111-88-6

 

Characteristics: Colorless transparent liquid. Soluble in ethanol, ether, acetone and benzene, insoluble in water. Special odor of thiols.

 

Uses: Polymerization and sulfurization regulator and rubber aid used in the production of synthetic rubbers, raw material in production of pharmaceuticals, dyes, and pesticides, stabilizer for surfactants and resins, organic synthetic reagent

NDM (N-Dodecyl Mercaptan)

CAS:112-55-0

 

Characteristics: Colorless or light yellow liquid. Soluble in methanol, ether, acetone, benzene, ethyl acetate, insoluble in water. Flammable in case of open flame or high heat. Decomposed by heat to produce toxic sulfide fumes.

Uses: Relative molecular mass regulator for the polymerization of synthetic rubbers, synthetic fibers, synthetic resins, stabilizer, fungicide, detergent of polyvinyl chloride

TDM (Tert Dodecyl Mercaptan)

CAS:25103-58-6

 

Characteristics: Colorless or light yellow liquid. Soluble in methanol, ether, acetone, benzene, ethyl acetate, insoluble in water. Flammable in case of open flame or high heat. Decomposed by heat to produce toxic sulfide fumes.

 

Uses: Relative molecular mass regulator for the polymerization of ABS resins, butylbenzene rubber, nitrile rubber, polystyrene, stabilizer and antioxidant for polyolefins such as polyvinyl chloride and polyethylene, raw material for synthesizing certain drugs, pesticides, fungicides and spices.

DOTP (Dioctyl Terephthalate)

CAS:6422-86-2

 

Characteristics: Colorless liquid. DOTP is produced by esterifying 2-Ethylhexanol and Terephthalic Acid. It is a non-phthalate and environmentally friendly plasticizer; it is not listed among the chemical substances restricted by EU countries. It is highly compatible with PVC and has excellent plasticizing efficiency, excellent processing performance, and superior thermal aging stability.

 

Uses: Wires & cables, leather & clothes, gloves, shoes, construction materials, PVC plastisols

TOTM (Trioctyl Trimellitate)

CAS:3319-31-1

 

Characteristics: Colorless liquid. TOTM is produced by esterifying 2-Ethylhexanol and trimellitic acid. Low volatility, low migration, good electron resistance and heat resistance. Wires & cables made by TOTM can pass the US UL62 105℃ inspection. For the TOTM-based PVC plastisols, they have higher viscosity than that of DIDP-based ones under the same conditions of softness, and better stability than that of DEHP-based ones.

 

Uses: Wires & cables, leather & clothes, gloves, shoes, construction materials, PVC plastisols

DOA (Dioctyl Adipat)

CAS:103-23-1

 

Characteristics: DOA has good characteristics at low temperature and in PVC plastisols, and is the most widely used cold-resistant plasticizer. For the DOA-based PVC plastisols, they have higher volatility than that of DEHP-based ones in finished products with similar softness.  DOA has a low electric resistance and is suitable for anti-static processing products such as conveyor belts, flooring materials, etc.

 

Uses: Wires & cables, leather & clothes, gloves, shoes, construction materials, PVC plastisols, plastic wrap

DPHP (Di-(2-Propylheptyl) Phthalate)

CAS:117-81-7

 

Characteristics: DPHP is a phthalate ester plasticizer with high-performance and wide range of applications. It is highly compatible with PVC, and has excellent plasticizing efficiency, low migration, excellent heat-resistance. DPHP has low volatility and low fogging, which is used for automotive interior. Its excellent electric resistivity property is also used for wire and cable plastic products.

 

Uses: Wires & cables, leather & clothes, gloves, shoes, construction materials, PVC plastisols, car interiors

PTBP (para-tert-butyl phenol)

CAS:98-54-4

 

Characteristics: It is soluble in organic solvents (such as alcohols and ethers) but has relatively low solubility in water. As a phenolic compound, it exhibits some acidity and can react with basic substances to form salts.

 

Uses: It is commonly used as an intermediate in the synthesis of other compounds, particularly in the production of polymers and plastics. It serves as an antioxidant in lubricants, greases, and other chemical products, and is one of the components used as a surfactant in certain cleaning products.

Recycle PA6

CAS:25038-54-4

 

Characteristics:A Nylon 6 has excellent tensile strength and toughness, allowing it to maintain its performance under various environmental conditions. It can be widely used in engineering thermoplastic plastics.

 

Uses: Widely used in the production of nylon fibers, applied in clothing, carpets, and industrial fabrics. As a major material for engineering plastics, it is used in automotive components, electrical enclosures, and mechanical parts.

PC (Polycarbonate)

CAS:25037-45-0

 

Characteristics:Polycarbonate is a thermoplastic material with high transparency and excellent mechanical properties. Its main structural unit is the carbonate group. Polycarbonate has good optical clarity, with a light transmittance of over 90%. Its impact resistance is exceptional, making it stronger than regular glass, suitable for applications requiring protection.

Uses: It is used to make eyewear lenses, camera lenses, and other optical components. It is widely applied in electrical enclosures, displays, and other electronic components due to its excellent electrical insulation properties. Because of its biocompatibility and high-temperature resistance, polycarbonate is also used in certain medical devices and containers.

商務書籍

Get in Touch

Winston Lin

+886 2-2517-5715 #205

winston.lin@benzene.com.tw

BENZENE

104482 台北市中山區長春路172號9樓之一

9F.-1, No. 172, Changchun Rd., Zhongshan Dist., Taipei City 104482, Taiwan (R.O.C.)

Tel: +886 2-2517-5715 

Fax: +886 2-2517-0706

© 2024 by Benzene Co., Ltd.     Powered and secured by Wix

白色丙烯酸塗料
bottom of page